P-AIMS Basic Software

Up to 1024 indoor units can be  controlled by one PC

Functions

  • Standard remote control for all indoor units
  • Many timer schedule programs can be set on the calender
  • Detailed information display for alarms
  • Automatic data backup to HDD
  • CSV file output with alarm history, operating status.

Optional Software

With 4 upgrade packages the basic software can be upgraded to suit individual requirements

Optional Software

Load distribution

Load distribution calculation for each tenant

• Air-conditioner load distribution ratio is calculated for each unit (tenant) with used energy consumption data (m3, kWh).
• Calculated data is stored with CSV type file.

Web application

Web application

Web access & control from remote station

• Operating status monitor is available on the layout display.
• Object’s layout and indoor unit’s location can be checked at once.
• Each unit can be controlled by virtual remote controller on the display.
•Max 4 layout screens are shown at once.

Object layout display

Object layout display

Whole system can be controlled visually

• Operating status monitor is available on the layout display.
• Object’s layout and indoor unit’s location can be checked at once.
• Each unit can be controlled by virtual remote controller on the display.
• Max 4 layout screens are shown at once.

BACnet software interface

BACnet software interface

Connectable to BMS system

• Can communicate with other equipment by BACnet protocol.
• FSV systems can be controlled by both BMS and P-AIMS.
• Max 255 indoor units can be connected to 1 PC (that has P-AIMS basic & BACnet software).