Installation

High External Static Pressure 35Pa

When unit is installed on a narrow balcony and exposed to the sun, the fence at the front side would restrict hot air from being discharged. Heat accumulated in an enclosure can cause over-heating. This could potentially result in damage or shorten the product’s life span. A high external static pressure sends the air further away from the outdoor unit and through the fence. This provides better air circulation and distribution.

High External Static Pressure 35Pa

Previous Model - Low Pressure

When the pressure is low, hot air will accumulate in the unit thus affecting its work performance and of the unit above it as well.

LE Series - High Pressure

But with a high pressure of 35Pa, hot air is sent further away preventing overheating inside the outdoor unit enclosure.

Previous Fan

High electrostatic pressure disrupted the airflow of the previous fan, lowering the air pressure and preventing hot air from being discharged far enough.

LE Series Fan

The new LE Series fan has ribs extending near the blade tips, in a structure that resists deformation. During high electrostatic pressure, this blade shape suppresses disruptions in the airflow,
and a high air pressure of 35Pa discharges the hot air a sufficient distance.

Long Piping Design Length for Greater Design Flexibility

Long Piping design for LE1
Long Piping design for LE2

Refrigerant Chargeless Up to 50m

Up to 50m of piping without additional gas charging makes installation flexible, easy and hassle-free.

A 50m pipe length is sufficient for most residential and small business buildings. When total piping length exceeds 50m, additional refrigerant charge is required.

*Only for LE2 Series

Refrigerant Chargeless Up to 50m

Compact Design

Also, since Mini VRF LE Series is a single unit, it is possible to install the unit in more various places compared to the Single Split system.

Comparison Chart for Installation of Outdoor Unit

Short Height of 996mm

In addition to raising efficiency, we have made the outdoor unit more compact. It can now be installed in places that were previously too small.

*Only for LE2 Series

Short Height of 996mm

Up to 13 Indoor Units Connectable

An expansion from Panasonic VRF line up, the mini FSV is compatible with the same indoor units and controls as the rest of the FSV range.

Up to 13 Indoor Units Connectable

* Use any of the 22 type indoor models. Depending on the size or type of indoor unit, tubing size shall be changed. Please refer manuals for details.
* Diversity ration 50-130%
* 6 HP only; 4 HP for 7 units, 5 HP for 8 units.

Check Also